產品中心
開煉機
相關文章
一、桌上型小開煉機特點及用途:
其主要的功能在于使產品能符合客戶所要求的質量及顏色,為了達到客戶的要求,再將實驗的結果及其比率用于生產線,而本機也就是將試驗用原料及配合劑以混合均勻之設備。
二、桌上型小開煉機技術規格:
1.滾筒:實際可用長度(即擋板間的距離,并且通水均勻)約15cm,(ф76mm×L 150mm)
2.速比:1:1.16(前后輥比,前滾為操作時離人近者),實際為8.6:10轉/分,
3.溫度:電加熱,常溫-+300度
4.馬達:0.3HP,開度可調節,通常開度0.2-3mm。
5.安全系統:剎車安全桿,手指輕碰停并反轉一定角度,安全桿位于滾輪上方,急停桿靠彈簧支撐。
6.整機尺寸約:80*40*50cm。
7.機重:80kg以內。
8.機械結構:鋼板(比傳統工藝鑄鐵的重量輕體積小機械強度更高韌性好)
9.電源 2∮,AC220V,3A
10.功率:3KW
三、桌上型小開煉機技術參數:
型號
HY-76D
HY-76Y
HY-76S
適用范圍Scope of application
塑膠、硅膠Plastic, silica gel
普通橡膠Rubber
煉膠量Compound amount
0.1-0.5kg
加熱方式Heating mode
電加熱Electric heating
油加熱Oil heating
摩擦生熱Friction heat
冷卻方式Cooling method
自然風冷Natural air cooling
自來水冷Water cooling
滾筒規格Roller specification
Ø76×L200mm
溫度范圍Temperature range
Rt-300℃
自來水溫Water temperature
滾筒開度Roller opening
0.2-3mm
調速方式Speed control mode
定速、單調速、雙調速Constant speed, single speed, double speed
速度范圍Speed range
定速:約10r/min;調速約:5-25r/min或Speed: speed of about 10r/min; about 5-25r/min or specify:
速比Speed ratio
定速和調速:1∶1.27 The constant speed and variable speed:1∶1.27
安全裝置Safety device
前(左、右)、后(左、右)有手拍急停按鈕Before (left, right), after (left, right) hands shoot emergency stop button
單馬(ma)達功率Single motor power
0.75KW
1.5KW
加熱功率Heating power
2KW
0KW
總功率The total power
3KW
電壓Voltage
220V
體積Volume
80×40×50cm
重量Weight
About 100kg
About 120kg
電話
在線交流
微信掃一掃
返回頂部